9
EZ-GO INSTALLATION INSTRUCTIONS
1. Remove Golf Cart Seat and Rubber Mat.
2. Run fish line and fish harness through channel opening.
a. Feed fish line through battery compartment channel opening as
shown.
b. Tape Wiring Harness (I) connectors along the fish line 3 places
so that connectors do not overlap as shown. This will allow
enough clearance for harness to pass through opening.
c. Pull on fish line to feed harness
through channel opening.
d. Remove tape from harness.
3. Route Wiring harness along channel to
front of vehicle as shown.
Note: The two orange wires with blue
connectors will not be used for this install.
Double back the orange wires into the
channel and secure with cable tie to store.
