ClimaCheck Gateway NX400 Hardware Manual
–
2020-03-26 Page 24 of 41
IO Config Edit
Handles configuration for analog inputs on the Gateway and external units connected through
Modbus/RS485. Data send interval, interval to fetch commands from the ClimaCheck Online server
and Debug mode is also controlled from this tab.
Mobile
APN, username and other settings for the built-in modem.
LAN 1
IP address and other settings for the wired/ethernet network connection.
LAN 2
IP address and other settings for the second wired/ethernet network connection through a USB-to-
Ethernet converter, not included as standard. Contact ClimaCheck for more information.
Wifi
SSID, passphrase and other settings for the wireless LAN (Wi-Fi) connection.
Gateway and PCMode
Settings for the ClimaCheck RTCU Gateway and PC Mode as default setting.
Debug
View debug information.
Functions on the different tabs are described in more detail in the below sections.
4.2
Password protection
To be able to write a configuration to the Gateway from the configurator a password needs to be
entered. All units are configured with a default password but this can easily be changed.
4.2.1
Connect to and unlock unit
Follow the steps below to unlock the unite.
•
On the Action menu choose Connect to Device, in the lower right corner the PAID of the
connected device can be seen, Figure 12.
•
On the Action menu go to Unlock for Write to Device
•
Enter the password in the new window and press OK (default password:
ef56
)
When the correct password has been entered all menu options are accessible and a new option
appears on the Action menu where the user password can be changed.
4.2.2
Change password
To change password follow the steps below
•
Connect to and unlock the device with present password, see 4.2.1
•
On the Action menu go to Configure Password for unlock
•
Enter the new password in the window and press OK
The new password is saved.
If password is lost it can be reset by ClimaCheck support.
