Clifford Matrix 12, Руководство по установке

Страница: 29 / 64

29
© 2008 Directed Electronics. All rights reserved.
➤
Door lock wire diagrams
Important: Depending on the vehicle, the door locks may be con-
trolled by an optional data bus expansion module. If so, no door
lock interface wiring is required.
There are eight different types of door lock systems (Type A - H).
Type A:
Three-wire (+) pulse controlling factory lock relays.
Type B: Three-wire (-) pulse controlling factory lock relays.
Type C: Direct-wired reversing-polarity switches. The switches are wired directly
to the motors. This type of system has no factory relays.
Type D: Adding one or more aftermarket actuators. These include central locking
systems without an actuator in the driver’s door, but with factory actuators in all
the other doors.
Type E:
Electrically-activated vacuum systems.
Type F:
One-wire system - cut to lock, ground to unlock.
This is a very rare system found mainly in early 90’s imports and some newer
Hyundais.
Type G:
Positive (+) multiplex. One wire controls lock and unlock using resis-
tors).
Type H:
Negative (-) multiplex. Same as Type G system, but uses (-) pulse in-
stead.
Note: You can use a 456L door lock learn module for Type G and H, instead of
relays and resistors. For additional information and wiring diagrams see Docu-
ment 1041 at www.directechs.com under the Resource tab.