15
© 2008 Directed Electronics. All rights reserved.
H1/3
BROWN
(-) HORN OUTPUT
This wire supplies a (-) 200 mA output that can be used to honk the vehicle horn.
It outputs a single pulse when locking the doors with the remote, and two pulses
when unlocking with the remote. This wire also outputs pulses for 30 seconds
when Panic Mode is activated. If the vehicle has a (+) horn circuit, an optional
relay can be used to interface with the system.
H1/4
WHITE/BROWN
LIGHT FLASH -ISOLATION WIRE - PIN 87a of onboard relay
This wire connects to pin 87a of the onboard light flash relay. It is used when-
ever light switch isolation on the vehicle is necessary. If the vehicle has a mul-
tiplex circuit that needs the light switch isolated, you can remove the onboard
light flash fuse and replace it with the specified resistor (paying attention to the
polarity selection).
x
x
Lightswitch
Multiplex
wire in car
White/Brown
White
Cu
t
Replace fuse with
specified resistor value
Light Flash Fuse
Jumper under door
To control
module in car
Multiplex Lightflash Interface
Содержание Matrix 12
Страница 62: ......
Страница 63: ......
Страница 64: ...N4102X 2008 09 Vista CA 92081 www directed com 2008 Directed Electronics All rights reserved...