www.directed.com
52
blackjax deactivation sequence
To deactivate BlackJax turn the key on and then enter the PIN code at any time.
bypass blackjax temporarily (if on in program grid)
Bypass BlackJax temporarily
1.
Turn ignition on.
2.
Enter PIN code. Do not enter valet or programming mode.
3.
Within 10 seconds: Press lock/unlock button of remote control.
4.
Siren chirps 1 time as confirmation of BlackJax bypassed.
5.
Turn Ignition Off, siren chirps 3 times as confirmation of exiting programming.
N
NO
OTTEE:: If ignition remains on after entering PIN code and no action for 10 seconds,
unit will automatically exit programming mode without chirps.
To return to normal BlackJax Operation
1.
Turn ignition on.
2.
Enter Pin code.
3.
Within 10 seconds: Press lock/unlock button of remote control.
4.
Siren chirps 2 times as confirmation of BlackJax active.
5.
Turn ignition off, siren chirps 3 times as confirmation of exiting programming.
N
NO
OTTEE:: If ignition remains on after entering PIN code and no action for 10 seconds,
unit will automatically exit programming mode without chirps.
blackjax off warning indicator
Each time the ignition is turned off when BlackJax is bypassed the LED will blink 10
times as a visual reminder.
sensors
tilt sensor
The 507M Tilt Sensor is used to compliment the level of security provided by the shock
sensors found on most alarm systems. The tilt sensor detects when the vehicle is being
raised in an attempt to either remove the wheels/tires or tow the vehicle. The 507M
is capable of independently learning the vehicle’s initial inclination angles each time
the vehicle is parked, ensuring the most accurate tilt sensing possible.
