Pas sen ger Com part ment Con nec tions (Con tin ued)
Park ing Lights (Con tin ued)
3. Connect a voltmeter lead to ground and find the single wire that shows +12v when the
parking lights are on and 0 volts when they are off.
4. Connect
both
of the BROWN wires to the parking light wires.
5. Connect the RED/WHITE wire to the vehicle battery positive (+) terminal via the
supplied 20-amp fuse and fuseholder.
Dual Park ing Light Cir cuit (Most Euro pean Ve hi cles)
1. Turn on the parking lights and access the Parking Light wiring in one of the following
locations:
n
Near the head light switch
n
In the door sill har ness go ing to the rear lights
n
At any of the four Park ing Light bulbs
2. If working underdash, be sure to turn the dashlight dimmer to its lowest setting.
3. Connect a voltmeter lead to ground and find the two wires that show +12v when the
parking lights are on and 0 volts when they are off.
4. Connect one lead to the left-side Parking Light circuit and connect the other lead to the
right side circuit.
5. Connect the RED/WHITE wire to the vehicle battery positive (+) terminal via the
supplied 20-amp fuse and fuseholder.
NOTE: Never con nect the RED/WHITE wire to ground. Al ways pick up the
positive- switching park ing light line(s).
9
