CLEOPATRA Luxusline Duo Imaza 750, Инструкция по установке и эксплуатации

Страница: 71 / 80

71
A
1
2
English
English
EasyWhirl operation
EasyWhirl operation (Fig. A)
1. On / off switch function „Spa“
2. On / off switch function „Hydro“
Stand By
The green LED fl ashes with an interval of 8
seconds.
Function „Spa“ ready for use
To ensure proper operation with suffi cient wa-
ter level, the green LED fl ashes at an interval of
0.5 seconds.
Whirlfunction „Spa“
The whirlfunction is activated by pressing the
control button, the LED turns green. To turn
off the whirlfunction, press the control button
again. The system automatically enters into the
status „function available for use“.
Emptying of the Whirlpool
Before emtying the whirlpool, please shut off
the whirlfunction. If the water level sunk so far
that a proper function is no longer guaranteed,
the system automatically goes into „standby“
mode.
Attention! Blower run-on function
20 minutes after emptying the Whirlpool the
blower run-on function starts automaticely.
Possible residual water in the nozzles will be
blown out. The green LED fl ashes twice with
an interval of 0.5 seconds. After fi nishing the
blower run-out function the system automatical-
ly goes into „standby“ mode.
Stand By
The green LED fl ashes with an interval of 8
seconds.
Function „Hydro“ ready for use
To ensure proper operation with suffi cient wa-
ter level, the green LED fl ashes at an interval of
0.5 seconds.
Whirlfunction „Hydro“
The whirlfunction is activated by pressing the
control button, the LED turns green. To turn
off the whirlfunction, press the control button
again. The system automatically enters into the
status „function available for use“.
Emptying of the Whirlpool
Before emtying the whirlpool, please shut off
the whirlfunction. If the water level sunk so far
that a proper function is no longer guaranteed,
the system automatically goes into „standby“
mode.
1 Spa 2 Hydro
Both the Spa and Hydro function are oparatable with one button