CLEOPATRA Luxusline Duo Imaza 750, Инструкция по установке и эксплуатации

Страница: 57 / 80

57
A
1
2
3
5
7
4
6
English
English
Mini Poolmaster operation (Fig. A)
1. Mini Poolmaster
2. Interval function for water and air system
3. Basic function 1: Hydro system on / off
4. Restriction of pump and/or blower perfor-
mance
5. Increase of pump and/or blower perfor-
mance
6. Basic function 2: Air system on / off
7. Basic function 3: Light on / off
Standby:
The display is not lit. When the tub is being
fi lled, the control is automatically switched
on when the maximum water level is
reached. The basic functions are lightly
backlit in orange in the display of the Mini
Poolmaster.
If your whirlpool is not equipped with indi-
vidual basic functions, these functions will
not be backlit in the display and are thus
not available.
The whirlpool is switched off automatically
after approx. 20 minutes after being put
into operation. The whirl process can be
resumed immediately without a break.
Hydrosystem
When button 3 is pressed, the hydro
system starts with 50% intensity (standard
setting). The backlighting of the button
is increased and, in addition, the
backlighting of the buttons 2, 4 and 5
signals that these are also enabled for
selection.
The intensity can be increased or reduced
by pressing the buttons 4 or 5.
The interval function can be activated
with button 2. The intensity changes to
the standard setting (50%) and cannot
be changed. The interval frequency can
be increased or reduced by pressing the
buttons 4 or 5.
After approx. 30 sec., the backlighting of
the buttons 2, 4 and 5 is switched off . They
are no longer active.
By pressing button 3 once, the buttons are
backlit again and setting corrections can
be made. Pressing button 3 again switches
off the function.
Mini Poolmaster operation