CLEOPATRA Cleo Steam Smart 90187003, Руководство по установке

Страница: 47 / 68

47
11 Steam pipe
1
> 600 mm
> 50 mm
Euca / Fragrance connection
piece preferably near the
steam inlet and accessible
The steam pipe must always be made of an isolated copper pipe with a specified minimum
diameter. This is 22 mm for generators up to 6 kW. At 9 kW a pipe diameter of 28 mm is used.
The steam line is connected to the generator by means of the supplied rubber, steam hose and
the supplied brass bend. It is forbidden to use knees in the steam pipe. All bends must be
carried out with a minimum radius of 50 mm. A knee is only used for the direct steam inlet in
the cabin.
The steam pipe must always be placed at least 600 mm upwards to prevent the flow of hot
water drops. The maximum length of a steam pipe is 3 meters. Make sure the steam pipe runs
down to two sides: the steam outlet and the steam generator. In this way no so-called ‘saggers’
are created, so that gurgling noises can not arise from stagnant water.
When the installation is provided with a fragrance dispenser, make sure that this pipe does not
have any ‘sagger’ in which fragrance remains. For the quality and longevite of the fragrance it
is important that it can flow directly downwards to the inlet piece. A small ‘curved siphon’ (see
drawing) in the inlet piece guarantees the correct operation.