Installation Guide_PV-ezRack_SolarTerraceII-A_AU_V2.0
1/10 Duerdin Street, Clayton VIC 3168 Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
08
page
of 21
4.3 Installation Dimensions
All drawings and dimensions in this installation guide are a generic reference only. PV-ezRack
®
SolarTerrace II-
A™ is to be optimized to suit specific conditions for each project and documented in a construction drawing. As
a result, major components of PV-ezRack
®
SolarTerrace II-A™ may be provided in section sizes and lengths that
vary from those shown in this guide. The installation process detailed in this instruction guide remains the same
regardless of the component size. In case you need to do any on-site modifications or alteration of the system
in a way that would be different from the construction drawing please provide marked up drawings/sketches for
Clenergy’s review prior modification for comment and approval.
Installation Instruction
Below are the side view drawings of support for 60 cell panels(up to 1700 x 1100 mm)and 72 cell
panels (up to 2000 x 1100 mm) at 20° and 30° tilt angles.
Side view drawings of support for 60 cell panels (up to 1700 x 1100 mm)
Side view drawings of support for 72 cell panels (up to 2000x1100mm)
INTRODUCTION
