Clemco 27765, Руководство пользователя

Страница: 11 / 11

BEACON LED BLAST LIGHT Page 6
© 2017 CLEMCO INDUSTRIES CORP.

www.clemcoindustries.com

Manual No. 27765 Rev. B
7.0 REPLACEMENT PARTS
7.1
Beacon Blast Light Assemblies
Description Stock No.
12-VDC blast light with 10-ft cable ......................... 28438
12-VDC blast light with 50-ft cable ......................... 27740
12-VDC blast light with 100-ft cable ....................... 27741
120-VAC blast light with 10-ft cable ....................... 28439
120-VAC blast light with 50-ft cable ....................... 27742
120-VAC blast light with 100-ft cable ..................... 27743
7.2 Service Kits
7.2.1 Lens kit, outer glass, Figure 6
Pack of three with O-ring ....................... 28163
Pack of 20 without O-ring ........................ 28520
Figure 6
7.2.2 Poly inner lens kit, Figure 7 ....................... 28164
Quantities shown in parentheses ( )
Figure
7
7.3 Blast Light Replacement Parts, Figure 8
Item Description Stock No.
1. Retainer, outer lens ................................... 27748
2. Bracket, mounting ..................................... 27751
3. Mount, light ................................................ 28161
4. Screw, light mount ..................................... 28162
5. Diffuser ...................................................... 28160
6. Screw, 1/4-NC x 1.5" hex head cap .......... 03055
7. Nut, 1/4-NC lock ........................................ 03112
8. Tie, 14.5" long nylon .................................. 02195
9 Gasket, 5/16" x 1", two ft. required ............ 00187
10.* Driver, 120-v to 12-v LED .......................... 27758
11.* Strain relief, 3/4-NPT x 1/4" cable ............. 27756
12.* Strain relief, 3/4-NPT x 3/8"- 5/8" cable .... 27757
13.* Cord, 4-ft 120-v power .............................. 27766
14.** Clamp set, 12-volt battery ......................... 27763
15. Service kit, glass outer, ...... refer to Section 7.2.1
16. Service kit, poly inner, ....... refer to Section 7.2.2
Figure 8
* Used only with 120-volt lights
** Used only with 12-volt lights
Backplate Screws (4)
Backplate (2 halves)
Retainer Gasket (1)
Molded Gasket (1)
Lens housing (1)
Nut (4)
Glass Lens
O-Ring
(with pack of three only)
Poly Lens (1)
8
9
4
7
2
6
3
*10
*11
*12
*13
**14
5
1
15
16