Cleco CellCore CCBA, Руководство по программированию

Страница: 51 / 66

Apex Tool Group P2398PM |
2019-12
51
Menus and Functions
3
EN
To load the parameters:
1. Save a
parameters_(DateTime).zip
file to a USB stick. The USB stick may only contain one file
with the extension
.zip
.
2. Connect the USB stick with the tool via the Micro B USB cable.
3. Navigate to
Load parameters :
> >
4. must be pressed to start the loading process.
→
The progress bar and status bar indicate when the data are loaded.
3.11.5 Saving parameters
Data about parameters, messages, information and settings are saved. Archive data are not saved.
> >
Fig. 3-47: Submenu – Saving parameters
Button Description
Start the loading process.
Display of the saving progress.
The status bar indicates what percentage of the parameters are already loaded.
Display of the status of the loaded parameters.
After loading, the status bar is red or green:
•
Green: The loading process has been successfully completed. There is an "OK" in
the status line.
• Red: An error occurred during the loading process. See Error messages, software
updates and data storage, page 58.
0%
0