Cleco 35 Series, Руководство по эксплуатации и обслуживанию

Страница: 4 / 20

4
Safety Recommendations
ADDITIONAL SAFETY RECOMMENDATIONS FOR USE OF
RIGHT ANGLE DRILLS
Follow good machine shop practices. Rotating shafts and moving
components can entangle and entrap, and can result in serious
injuries. Never wear long hair, loose-fitting clothes, gloves, ties, or
jewelry when working with or near a drill of any type.
Drilling or other use of this tool may produce hazardous fumes and/
or dust. To avoid adverse health effects, utilize adequate ventila-
tion and/or a respirator. Read the material safety data sheet of any
cutting fluids or materials involved in the drilling process.
• Drill bits are sharp. Handle them carefully to avoid injury.
• The cutting tool maximum speed rating must equal or exceed
the rated speed of the tool.
• Use the appropriate size chuck key to securely tighten a drill
bit in the chuck.
• Use precautions when drilling because of the possibility of the
cutting tool bending or breaking.
• High reaction torque may be experienced by the operator with
any drill at breakthrough.
• Drill bits or accessories not centered properly in the chuck can
cause excessive wobble or vibration.
For more information on the safe use of portable air tools, see the
latest edition of ANSI B186.1, Safety Code for Portable Air Tools,
available from the American National Standards Institute, Inc. 11
West 42nd Street, New York, NY 10036.
This information is a compilation of general safety practices
obtained from various sources available at the date of production.
However, our company does not represent that every acceptable
safety practice is offered herein, or that abnormal or unusual
circumstances may not warrant or require additional procedures.
Your work may require additional specific safety procedures.
Follow these procedures as required by your company.
Warning Labels
The warning labels found on these tools are an essential part of
this product. Labels should not be removed. Labels should be
checked periodically for legibility. Replace warning labels when
missing or when the information can no longer be read. Replace-
ment labels can be ordered as any spare part.
!
Do not wear loose fitting clothes,
long hair, gloves, ties or jewelry.
WARNING
203289-4
OVER
CAUTION
!
Personal hearing protection is recommended when operating or working near this tool.
WARNING
!
Impact resistant eye protection must be worn while operating or working near this tool.
Read Operating Instructions carefully. Follow the Safety Recommendations for your safety and the safety of others. Hearing protection is recommended in high noise areas (above 85 dBA). Close proximity of other tools, reflective surfaces, process noises, and resonant structures can substantially contribute to the sound level experienced by the user.
WARNING
!
Repetitive work motions and/or vibration can cause injury to hands and arms. Use minimum hand grip force consistent with proper control and safe operation. Keep body and hands warm and dry. Avoid anything that inhibits blood circulation. Avoid continuous vibration exposure. Keep wrists straight. Avoid repeated bending of wrists and hands.
Do not remove this tag until the operator of this tool has read these safety precautions.
203185-4
203185-4
READ
OPERATING
INSTRUCTIONS
WARNING
!
Wear respirator where
necessary.
CAUTION
!