4
Warning
Cleaver Scientific PowerPro Power Supply has been tested and found to comply with
the limits for the CE regulation. Also, it is RoHS compliant to deliver confident product
which meets the environmental directive. These limits are designed to provide
reasonable protection against harmful interference when the instrument series is
operated in a commercial environment. This instrument series used together with
power supply unit generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this instrument series in a
residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at their expense. Changes or modifications not
expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment. It is strongly recommended for the user to read
the following points carefully before operating this equipment.
1.
Read and follow the manual instructions carefully.
2.
Do not alter the equipment. Failure to follow these directions could result in
personal and/or laboratory hazards, as well as invalidate equipment warranty.
3.
Use a properly grounded electrical outlet with correct voltage and current
handling capacity.
4.
Disconnect from power supply before maintenance and servicing. Refer servicing
to qualified personnel.
5.
Never use this instrument series without having the safety cover correctly in
position.
6.
Do not use the unit if there is any sign of damage to the external tank or cover.
Replace damaged parts.
7.
Do not use in the presence of flammable or combustible material; fire or
explosion may result. This device contains components which may ignite such
materials.
8.
Refer maintenance and servicing to qualified personnel.
9.
Ensure that the system is connected to electrical service according to local and
national electrical codes. Failure to make a proper connection may create fire or
shock hazard.
10.
Use appropriate materials and operate correctly to avoid possible hazards of
explosion, implosion or release of toxic or flammable gases arising from
overheated materials.
