13
4.
Power on the unit by pressing the ON/OFF switch on the back.
5.
The screen will show
for few seconds then enter to the mode-
selecting page.
4.3
Constant Mode
Use the Constant Voltage / Current / Power Operation for applications that require
only one specific voltage limit, current limit, and power limit continuously during the
entire operation of electrophoresis.
Note: When target constant mode is set, system automatically adjusts the other two
parameters to maximum to allow constant run. For example, if constant voltage is set,
system will adjust current and power to the maximum value.
Users could later lower the other two values by themselves. System will hold the value
either at target constant value or the one which has been reached first.
