Cleaver Scientific powerPRO Series, Инструкция по эксплуатации

Страница: 14 / 24

13/11/2018 Page 12
2. Use the up and down arrows to select
which parameter should be kept constant.
Press the enter key to move to the next
page.
3. Use the up and down arrows to navigate
the parameters, press the enter key to start
parameter adjustment.
4. Use the up and down arrows to adjust
parameter values, then press the enter key
to confirm.
Note: If the time value is set “0,” it indicates the power
supplier will constantly operate until user manually stops it.
5. Press the start Key to begin electrophoresis.
The LED next to the start key will light,
indicating the power supply is active.
Parameter values can be viewed during the run.
6. Pressing the pause key will temporarily
pause the run and will allow parameter
values to be altered using the same
method outlined above.
Pressing the start key will resume the run
7. Upon completion of the run, an alarm will
sound, and the screen will display
“Complete”.
8. Press the start key to terminate the run and
press the setting key to return to the
settings screen.