07/02/2019
Page 3
Safety Information
Cleaver Scientific microDOC System has been tested and found to be
compliant with CE regulations. microDOC system are also RoHS compliant.
These limits were designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment can generate, use, and radiate radio frequency energy, and
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at their
expense. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to op
erate the
equipment. It is strongly recommended for the user to read the following
information carefully before operating this equipment.
1.
Read and follow the manual instructions carefully.
2.
Do not alter the equipment. Failure to follow these directions could
result in personal and/or laboratory hazards, as well as invalidate
equipment warranty.
3.
Use a properly grounded electrical outlet with correct voltage and
current handling capacity.
4.
Disconnect from power supply before maintenance and servicing.
Refer servicing to qualified personnel.
5.
If solution is accidentally spilled on the instrument, disconnect
grounded plug and carry out appropriate decontamination measures.
For instance, turn the instrument upside down to avoid solution
contacting the internal components. Remove bottom cover and
inspect to assure solution has not contacted inner components or
connectors. Replace damaged parts, contacted inner components or
connectors.
6.
Do not use in the presence of flammable or combustible material, fire
or explosion may result. This device contains components which may
ignite such material.
7.
Refer maintenance and servicing to qualified personnel.
