07/02/2019
Page 14
6.
Close the microDOC door and switch off the white light. Select the
appropriate filter on the filter slider.
7.
Turn on the UV light source with the button on the front of the unit.
8.
Use the camera lens to zoom in and out by rotating the main body of
the lens.
9.
Change the exposure time as necessary, by rotating the dial on the
front of the camera:
10.
Capture the Image by pressing the shutter button halfway to
autofocus, and then fully once the “focus confirmed” noise is heard.
11.
At high zoom levels, the autofocus may struggle to focus, in this case
change the lens to manual focus by operating the switch on the side
of the lens and rotating the focus wheel manually.
12.
Press
button and
key to view the pictures on the memory
card full-frame in the monitor. Press
button again to return image
shooting mode
13.
When finished capturing image, please switch the camera off, and
then turn off UV Transilluminator and main power.
14.
Remove the gel from the Hood.
15.
Clean the UV transilluminator and dry the filter area. For more detailed
information, please consult the instruction manual of UV
transilluminator.
