Cleaver-Brooks C1X Series, Руководство по эксплуатации

Страница: 10 / 52

Standard Economizers
1-4 Part No. 750-266
Figure 1.2 - Installation, horizontal flow unit w/floor support
Figure 1.3 - Installation, horizontal flow unit w/ceiling support
Two (2) supported I-beams or channels can be used where larger economizers are being installed. The
exchanger can then be set on the beams and slid to the lower stack and/or stack adapter for final
securing. Position four (4) tie rods (as specified and supplied by others) which can be used to suspend
units depending on upper support.
C-B economizers are designed to support a maximum of 500 lbs stack weight above the economizer.
Structural integrity of the building should be verified (by others) prior to installing an economizer by
suspending from the ceiling.