ClearView SD4250, Руководство пользователя

Страница: 8 / 20

1.1.3.2.2 Tune Color
Move the cursor to “Tune Color” and enter into it. Then its sub menu shows as below (Press ‘up or down’ key to view,
there just show the default value):
1.1.3.2.3 Retrieve Status
Move the cursor to “Retrieve Status” and enter into it. Then its sub menu shows as below (Press ‘up or down’ key to
view, there just show the default value in each channel):
1.1.3.3 Audio
Move the cursor to “Audio” and enter into it. Then its sub menu shows as below (Press ‘up or down’ key to select, then
press the ‘enter’ key to enter):
1.1.3.4 Stream
Move the cursor to “Stream” and enter into it. Then its sub menu shows as below (Press ‘up or down’ key to select,
then press the ‘enter’ key to enter):
2.2.1. Encoder 1
2.2.1.1. Brightness
25 (0-50)
2.3. Retrieve Status
Port:1/AUTO/6.000 Port:3/AUTO/6.000
Port:2/AUTO/6.000 Port:4/AUTO/6.000
3.1. Sample Freq.
48KHz, 32KHz
44.1KHz
3.2.2. Output Bitrate
224Kbps, 256Kbps,
288Kbps, 20Kbps, 352Kbps,
384Kbps, 416Kbps,
448Kbps, 32Kbps, 48Kbps,
56Kbps, 64Kbps, 80Kbps,
96Kbps, 112Kbps, 128Kbps,
160Kbps, 192Kbps
3.2.3. Audio Mode
Stereo, Enhance Stereo
Dual-channel, Single-channel
3.3. Encoder 2
(Sub menu same as Encoder1)
3.4. Encoder 3
(Sub menu same as Encoder1)
3.5. Encoder 4
(Sub menu same as Encoder1)
4.1. Prog. Name
2.2.2. Encoder 2
(Sub menu same as Encoder1)
2.2.3. Encoder 3
(Sub menu same as Encoder1)
2.2.4. Encoder 4
(Sub menu same as Encoder1)
2.2.1.2. Contrast
48 (0-50)
2.2.1.3. Saturation
18 (0-50)
2.2.1.4. Hue
28 (0-50)
3.2. Encoder 1
3.2.1. Coding Type
Layer2,
Layer1
4.2. LCN
4.3. PID
4.4. NIT
4.5. PDS 4.7. Retrieve
Status
4.6. TS ID