ClearView SD4250, Руководство пользователя

Страница: 6 / 20

1.1.1 Power Up Display
After power up, the LCD shows as below:
1.1.2 Quick Setup Display
You can setup some basic parameter to make device work. You just need to press the left key to enter quick setup
display. This display shows as below:
1.1.2.1 Country
Move the cursor to “Country” and enter into it. Then it shows as below (Press ‘up or down’ key to select, then press
the ‘enter’ key to confirm):
1.1.2.2 Frequency
Move the cursor to “Frequency” and enter into it. Then it shows as below (Press ‘up or down’ key to select, then press
the ‘enter’ key to confirm your channel):
1.1.2.3 RF Output Level
Move the cursor to “Frequency” and enter into it. Then it shows as below (Press enter key to confirm setup, press right
or left or up or down key to change the output level, then press the ‘enter’ key to confirm the output level):
1.1.3 Main Menu Display
Main menu display shows all setting that allows user to operate. Press Enter, then press Exit to enter main menu
display. The menu shows as below:
1.1.3.1 RF Output
Move the cursor to “RF Output” and enter into it. Then its sub menu shows as below (Press ‘up or down’ key to select,
then press the ‘enter’ key to enter):
SD4250
CH-Num: 33 RF: 564.500
1. Country
1. Country
New Zealand
Australia
Europe
2. Frequency
CH-Num: 33 RF: 564.500
3. RF Output Level
90.0dBuV(80-95)
1. RF Output
1.1. Set RF Output
2. Frequency
3. RF Output Level
2. Video 3. Audio 4. Stream 5. System
1.2. Retrieve Status