ClearView SD4250, Руководство пользователя

Страница: 5 / 20

SD4250
CH-Num:33 RF:564.50
RF Output
1.1.
Set RF Output
1.2. Retrieve
Status
Video
2.1. Set Video
2.2. Tune Color
2.3. Retrieve
Status
Audio
3.1.
Sample Freq.
3.2.
Encoder 1
3.3.
Encoder 2
3.4.
Encoder 3
3.5.
Encoder 4
Stream
4.1.
Prog. Name
4.2. LCN
4.3. PID
4.4. NIT
4.5. PDS
4.6. TS ID
4.7. Retrieve
Status
System
5.1. Retri_
Inventory
5.2.
Power offset
5.3.
Save Config
5.4. System
Reset
5.5. IP Address
5.6.
Retrieve IP
Device Operations and Management
SD4250 is controlled and managed through the control buttons and LCD display.
LCD Display - It presents the selected menu and the parameter settings. The backlight in the display is on when
the power is applied.
LED - These lights indicate the working status
• PWR: It lights on when the power supply is connected.
• ENC1, ENC2, ENC3, ENC4: It lights on when the signal source input.
Left/Right/Up/Down buttons - Use these buttons to turn the screen pages, change the parameter settings in the
program mode.
OK buttons - Use this button to enter a submenu or save a new setting after adjustment; press it to start adjusting
the value of certain items.
EXIT buttons - Use this button to move to the previous page.
1.1Menu