ClearView IPD-81A, Руководство по эксплуатации

Страница: 36 / 143

31
Parameter Note
Brightness
It is to adjust the image overall brightness via linear adjustment mode.
The larger the number is, the brighter the picture is, and on the contrary it
is opposite. The picture get blurry easily when the value is set too big.
Contrast
It is to adjust the picture contrast. The bigger the value is, the bigger the
bright contrast becomes, and on the contrary it is smaller. The dark area
becomes darker and the bright area becomes overexposed easily when
the value is set too big. The picture becomes blurry when the value is set
too small.
Saturation
It is to adjust the color darkness and lightness. The color becomes darker
when the value is bigger; on the contrary it becomes lighter. The value
causes no influence to the overall brightness of the image.
Sharpness
It is to adjust the sharpness level of the picture edge. The bigger the
sharpness value is, the more obvious the image edge becomes, the image
is likely to generate noise more easily when the value is set too big.
Gamma
It is to change image brightness and improve the dynamic display range of
the image via nonlinear adjustment mode. The bigger the value is, the
brighter the picture becomes, and on the contrary it is opposite.
Mirror After mirror is enabled, the monitoring image will be displayed invertedly.
Flip
It is to change the display direction of the monitoring image.
It includes following options:
 Normal: The monitoring picture is normally displayed.

Flip mode 1: The monitoring picture is displayed with clockwise
rotation 90°

Flip mode 2: The monitoring picture is displayed with anticlockwise
rotation 90°

180°: The monitoring picture is displayed upside down.
Note:
Please set the video resolution as 1080P or lower when applying flip mode
for some devices.
EIS
It can realize electronic anti-flicker function via comparison algorithm of
image difference, which can effectively solve the problem of image jittering
during application and it can make the image clearer.
Step 3
Click “Save” and complete the image parameter config of the camera.