Doorframe Diagram: Special Notes
ATTENTION:
For some doors, the upper brackets must be mounted wider than the
actual doorframe. In those instances, cut a 16" section of stock 2" x 2" doorframe tubing
and mount it to the outside of each vertical doorframe using the supplied carriage bolts
and nuts in the locations shown in the diagram below. (Frame shown may differ from
actual frame.
END WALL SPECIAL NOTE:
If no
door is to be installed in the end wall,
attach square tubing in the door
opening as shown on the End Wall
Frame: Back diagram that follows.
Horizontal Doorframe Tube
Install square tube at the bottom of the
door opening and in the center of the
opening when no door is to be installed.
In the future, these can be removed if a
door needs installed.
Visit www.ClearSpan.com for additional products and customer assistance.
33 of 40
