CLEARSPAN
™
GARAGES
10
Revision date: 09.14.10
Interior Rafters
1. Select the tubing for the
first interior rafter assembly
and position it on the ground as previously described.
2. Install a 4-way square tube fitting (#104627) in the
locations shown in the diagram below and secure the
joints using Tek screws.
IMPORTANT:
To prevent damage to the cover, install
Tek screws so the heads do not contact the roof panels
when these are installed.
3. Connect the leg extensions using the 1.75" x 1.75"
square tube insert (#104075). (See the Base Rail
assembly steps if needed.) Place the insert 8" into each
tube and secure using Tek screws.
4. Repeat the steps for all remaining interior rafters.
5. Once all rafter assemblies are complete, continue with
the
Frame Assembly
instructions that follow.
RAFTER ASSEMBLY (continued)
Space below is reserved for customer notes.
