Section F - Install Main Cover
Step 1:
Fasten a ratchet to the end conduit with a Tek screw in the bottom hole of the ratchet. The
ratchet should be about 6" in from the end of the conduit. Repeat this step in all four corners.
Step 2:
On one side of the shelter, identify the rafters where you will install side ratchets. These
locations are at the second, the next to the last, and every other rafter in between. On this
model, you will install ratchets at all even numbered rafters. If you numbered the rafters 1 to 7,
these locations are at rafters 2, 4, and 6.
Step 3:
Fasten ratchets to the outside of these rafters using a Tek screw about 2" from the bottom of
the rafters. Note that ratchets are located on only one side of the shelter as this model uses
D-ring straps (installed later) on the opposite side.
Page 16