Visit
www.ClearSpan.com
for additional products and customer assistance.
CLEARSPAN
™
CARPORTS
14
SIDE STRUT INSTALLATION
Gather the parts:
• Struts (#QH1308)
• Tek screws
Complete these steps to install the four (4) side struts:
1. Locate one (1) seven foot strut and position it between
one end rafter leg and the leg of the first interior rafter
as shown below.
2. Align one end of the strut with the center of the interior
rafter leg and
secure the strut to the base rail
with a Tek
screw. See the diagram that follows for clarification.
Interior Rafter Leg
Base Rail
Attach strut here
3. Verify that the end rafter is plumb (straight up and
down) and
secure the top of the strut to the inside of
the end rafter leg.
4. Repeat the steps to attach the remaining side struts to
the shelter frame.
5. After securing the four (4) struts, complete the next
procedure to square the assembled frame.
Space below is reserved for customer notes.
