6
Installation
Required Tools and Materials
•
Small slotted screwdriver with 5/64” or 2 mm blade width — for connecting
power when not using Power over Ethernet.
Checking the Package Contents
Ensure the package contains the following:
•
ClearPix Panoramic High Definition IP Dome Camera
•
Terminal Block
•
T20 TORX tamper resistant key
•
3 Screws and Anchors for Solid Walls
•
Drill Template
Installation Steps
Complete the following procedures to install the dome camera.
1.
Removing the Dome Cover
on page 6.
2.
Mounting the Dome Camera
on page 7.
3.
Connecting Power
on page 8.
4.
Aiming the Dome Camera
on page 9
5.
Connecting the Dome Camera to a Network Video Recorder (NVR)
on
page 9
Removing the Dome Cover
Remove the dome cover by loosening the 3 tamper-proof screws that fix the cover to the
base. The tamper resistant key included with the dome camera can be used to loosen
the screws.
NOTE:
Be careful not to scratch the dome bubble.
