ClearOne Beamforming Microphone Array, Руководство по установке

Страница: 25 / 32

Chapter 3: Wall Mount Installation 21
Locate, level and mark for drill holes and the cable pass-through cut-out where the Wall Mounting
Plate will attach to the wall.
Drill holes in the marked locations to receive the fasteners
Cut out the cable pass-through cut-out hole.
» NOTE: The anchors and screws used to mount the Ceiling/Wall Mounting Plate
are not provided and must be selected by the installer for the type of wall material
supporting the Ceiling/Wall Mounting Plate. Take care while drilling and installing the
anchors so the wall material does not tear out and weaken the attachment.
Attach the Wall Mounting Plate to the wall with fasteners.
If you have attached the Ceiling/Wall Mounting Plate to a hollow wall, thread the cables for Link In,
Link Out and PoE through the wall space and out through the hole in the center of the plate.
» NOTE: Allow enough extra cable length to pass through the hole to easily run under
the Mic Mounting Plate when it is attached to the microphone array and to the ends
where they are to be connected.
Wall fasteners not included
in the kit. Select fasteners
appropriate to wall material.