ClearOne Beamforming Microphone Array, Руководство по установке

Страница: 21 / 32

Chapter 2: Ceiling Mount Installation 17
NOTE: Insert screws only partially.
HD 3X
Slide the Beamforming Microphone Array onto the Mic Mounting Plate with the screws passing
through the slotted keyholes.
Insert the final holding-screw through the Mic Mounting Plate into the Beamforming Microphone
Array. Tighten all screws. Plug in and route the cables through the cable slots and secure them
under the Cable Retention Clips provided with the Beamforming Microphone Array.
The following two illustrations show this in both lengthwise and rotated mountings relative to the
Suspension Post.
Slide screws into keyhole slots
Install final screw and tighten all screws
HD
Power over Ethernet Cable
Cable Retention Clips
LINK IN and LINK OUT Cables
Cable Retention Clips