manualshive.com logo in svg

Clearfield FieldSmart FxHD, Руководство по установке

Поделиться
Скачать
Clearfield FieldSmart FxHD Скачать руководство пользователя страница 3

3

FieldSmart

®

 FxHD Frame

__________________________________________________________

Installation Manual

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected] 

Manual 014815 REV C - Feb 2018

Application

With the FieldSmart FxHD front access design, Clearview® Cassettes are 

shifted to the outside of the frame and away from a fixed panel configuration. 

Instead of traditional panel configurations, the frame is configured with a series 

of Clearview Blue cassettes teamed with building brackets built into user-

defined building blocks. The FxHD Frame provides the ultimate in modularity 

and flexibility to scale from 12 to 2,016 ports in any fiber count, optimizing your 

ability to maximize fiber investment and assets. Clearview Blue’s in-cassette 

buffer tube storage allows the FxHD to reclaim the space used for traditional 

panels and mass buffer storage and to redeploy it by using building blocks of 

Clearview Blue Cassettes.

Description

The FieldSmart High Density Fiber Crossover Distribution System (FxHD) is the highest density fiber management frame 

solution available in the industry today, providing 2,016 SC terminations in a 7’ frame or when mounted back- to-back, FxHD 

supports a maximum density of 4,032 terminations in a space savings footprint of 9 cubic feet (36” x 36”).
Those deploying the FieldSmart FxHD can start with one Clearview Blue Cassette and add additional cassettes as 

addi

tional capacity is needed, up to a total of 168 cassettes and 2016 ports of connectivity. With instant access to all 

cassettes, adapters and jumpers, the frame is designed as a front access frame. The FxHD can be placed against a wall, 

cage in data center collocation environments or installed back to back. 
User-defined Clearview building blocks configured to exact port count specifications can be deployed in seconds with 

Smart-Connect tool-less fasteners. Clearview Blue Cassettes simply slide into building block assemblies with a “hard-stop” 

feature ensuring perfect alignment every time. Additional buffer tube/ribbon slack is stored within each cassette eliminating 

buffer tube congestion, pile-up or identification miscues. The dedicated “w-shaped” intrabay route scheme ensures long 

term reliability of circuits by maximizing proper slack storage of any jumper length, greatly reducing the chance of jumper 

tie-in or weaving. Full length doors provide complete physical fiber protection when closed and instant visual and physical 

access to the entire frame when opened.

Technical Specifications

 FieldSmart FxHD Frames

 Dimensions

7.2’ H x 36” W x 18” D

 Ratings

Compliant to Telcordia GR-449

 Port Density

2,016 SC or 4,032 LC (front access only, back-to-back mounting)

 Cassette Types Supported

Clearview® Blue

 Connector Types

SC/UPC, SC/APC, LC/UPC, LC/APC, MPO (additional options available upon request)

 Cable Types

Indoor Riser, Indoor Plenum, Indoor/Outdoor, Outdoor (Riser/Non-Rated), Outdoor Armored (Riser/Non-Rated), FieldShield®

 Splice Capacity

12 or 24 splices in each Clearview Cassette

 Storage Capacity

One meter of 900 μm fiber and up to three meters of jacketed fiber

 Cable Entry Compatibility

Top and bottom (floor) entry

 Caple Entry Clamp Location

16 (eight left, eight right) Note: Center clamping compatible for left and right same sheath distribution of buffer tubes/sub-units

 Recommended Jumper Length

Four meters, plus two meters for each additional frame

 Material

Stainless steel with almond powder coating

Содержание FieldSmart FxHD



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды