Page 7 of 10
P/N G0200181 Rev A, 1.0.12.14.2015
ClearCube Technology, Inc.
3700 W Parmer Lane
Austin, TX 78727
(512) 652-3500
www.clearcube.com
Setting up a SmartVDI-110 Server
Cabling
This section shows how to connect cables. Numbers in parentheses correspond to labels shown in
“
SmartVDI-110 rear ports and connectors
” to ease identification.
Step
Action
1
Install the included
mounting rails
to the server chassis and then install the chassis
in a rack.
2
Connect one or more Ethernet cables to the
LAN ports
(13) and (14) on the rear of
the chassis and connect the other end of the cable(s) to a network router or switch.
3
Connect one or more Ethernet cables to the
Dedicated IPMI port
(10) on the rear
of the chassis and connect the other end of the cable to a network router or switch.
4
From the rear of the chassis, connect the included
power cables
to the
power
connectors
(8 and 9) on the rear of the server, and connect the power cable to a
power outlet.
5
From the front of the chassis, press the
power button
(7) to power on the server.
Power option
Press the
power button
(7) on the front of the chassis to power on and power off a workstation.
Standby power is present when a workstation is powered off.
