- Usage of the
Speed Light
-
1.
Please put the
Stroboscope Testrecord
on your turntable.
2.
To adjust the optimal speed for the turntable with the
Speed Light
, hold the
Speed Light
about 1,97 – 3,94 inch (5 – 10 cm) over the
Stroboscope Testrecord
(picture 1).
3.
When the black lines stop in the blue light and do not move visible, you have the optimal
speed. (33 1/3 rpm outside stribe, 45 rpm inside stribe) (picture 1)
- If the lines move around clockwise, the drive is too fast.
- When the lines clearly move anticlockwise, the drive is too slowly.
4.
For the optimal speed adjustment we recommend our Smart Syncro (Art.Nr. EL024), so
you can exactly adjust the speed on the Hz.
5.
If the intensity of the light reduces, please change the battery.
Use the exact battery type: V23GA – 12 V - Alkaline
- Attention -
Open the
Speed Light
:
If the battery is flat, please open the
Speed Light
with a thin screwdriver.
You can easily push it in and turn it (picture 2).
Take care about the polarity of the battery when changing (picture 3).
The blue LED is not a laser diode!
Do not look directly in the light!
ca. 5-10 cm
Pic. 1: Distance between
Speed Light
and
Stroboscope Testrecord
User manual / Bedienungsanleitung
2
© clearaudio electronic GmbH, 2017/11
