Page / Seite 6
© clearaudio
electronic GmbH, 2021-07
User manual / Bedienungsanleitung
3. Setup of the
double matrix professional SONI C
Take the already assembled
double matrix professional SONIC
record cleaning machine from its
packaging. Set it on a stable and horizontal surface (such as a desk or rack).
Please note that due to the weight of the record cleaning machine, the feet of the device can cause
marks on soft surfaces. Due to the warm air outlet on the bottom of the
double matrix professional
SONIC
, the surface on which it rests should be heat resistant to a minimum of 60°C.
3.1 Connect to the mains supply
To avoid using an additional extension cable, place the
double matrix professional SONIC
within 2
metres of an electrical wall outlet.
Connect the supplied mains cable first to the IEC socket on the back of the
double matrix professional
SONIC
and then to the electrical wall outlet. Press the switch on the I EC socket and position it to “I ”.
Please read the whole user manual before cleaning your first record.
Note: Voltages are referenced to EU countries with 230V mains power.
I n other countries the mains voltage and frequency may vary ( e.g. USA 115V/ 60Hz.)
The correct operating voltage can be found on the back of the device on the product
information label ( Pic. 1) .
The mains cable supplied should be of the type appropriate for your country. Please ensure that the
mains voltage of your country also matches the mains voltage of the device. This information is also
on the product information label (see above).
I f it does not match, please contact your
Clearaudio
dealer.
Pic. 1:
Product information label on the back
