27
Problem
Possible cause/solution
Low suction force.
• Is the collecting container full? Empty it.
• Is
the
fi
lter heavily clogged up? Clean it.
• Is the suction opening/nozzle blocked? Switch off
the device and remove the blockage.
• It is also possible that some smaller items will re-
main stuck to the carpet or will be too big/heavy to
be picked up by the device.
The control lamp does not
light up when the device
is connected to the mains
power.
• Is the charger connected to the plug socket and the
connecting socket on the device properly?
• Is the plug socket defective? Try another plug
socket.
• Check the fuse of your mains connection.
Streaks when cleaning win-
dows or smooth surfaces.
• Clean the scraper lip.
• Turn over a worn scraper lip: Pull the scraper lip
sideways out of its holder, moisten with water or
cleaning agent in the rounded area and slide back
into the holder the other way round.
• Replace the scraper lip if necessary: If after turn-
ing the scraper lip over both edges are worn, a
new scraper lip is required. Replace the scraper
lip in the manner described above. To order any
additional spare parts, visit our website:
www.service-shopping.de
• Check the metering of the cleaning agent.
Technical Data
Article
no.:
Z
05348
Device
Model:
PC-P003W
Voltage supply:
7.2 V DC (Ni-MH battery pack), 1400 mAh
Motor
power:
60
W
Battery charging time:
approx. 7-11 hours (The
fi
rst charge lasts for
approx.
12-15
hours.)
Battery operating time:
approx. 20 minutes
Collecting container, max.
fi
ll level: 500 ml
Charger
Model:
LK-D090020
Voltage supply:
230 V ~ 50 Hz
Output:
9 V DC, 200 mA
Protection class:
II