25
• Eco
button
(
16
): Most of the energy supplied is needed to generate the steam.
When you use the iron and press the Eco button as you do so, steam is produced. If
you put the iron down and let go of the handle, no unnecessary steam is produced
and thus energy is saved.
• The
anti-drip system
prevents water from dripping out of the bottom of the iron at
low temperatures.
NOTE:
The anti-drip system may cause a clicking noise during
the heating-up or cooling-down process. This is normal and does not indicate a
defect.
• Thanks to the
ceramic coating on the bottom of the iron
(
18
) the device slides ef-
fortlessly over the fabric during ironing.
• The
anti-limescale system
of the device removes the lime from the water if you use
tap water instead of distilled water for steam-ironing. However, please note that it is
not possible to prevent the formation of limescale entirely.
• The
self-cleaning function
(
SELF CLEAN
button (
1
)) allows you to remove lime-
scale residues from the device, see the "Cleaning and Care" chapter.
Before Initial Use
CAUTION!
❐
Keep children and animals away from the packaging material. There is a danger of
suffocation!
❐
Any water residue in the reservoirs is due to the fact that the device was tested after
assembly and is not a defect.
• Unpack the items supplied and check them for completeness (see the "Items Sup-
plied and Device Overview" chapter) and transport damage. If the device does have
any damage, do not use it(!), but contact our customer service department.
• Before using the device, remove all paper bags, plastic bags,
fi
lms, cardboard and
any labels that may be on the device and are used for protection or advertising dur-
ing transportation.
• Before you use the iron on an item of clothing for the
fi
rst time, iron over a damp
scrap piece of fabric to remove any possible production residues from the bottom
of the iron.
• It is essential that you read through the "Temperature Setting" section before you
fi
rst use the device!
