EN
22
8. When all parts are dry, replace the cyclone insert in the dust container.
9. Put the lid on the dust container so that the arrow symbol on the dust container
points to the
symbol on the lid. Close the lid by turning it as far as it will go. The
arrow symbol should now be pointing to the symbol.
10. Put the dust container in the device. Make sure that it audibly locks into place.
Cleaning the HEPA exhaust air
fi
lter
The HEPA exhaust air
fi
lter is situated behind the protective grill on the back of the
vacuum cleaner.
1. Pull down the exhaust hatch latch with
fi
lter (
D
) and
remove the hatch simultaneously.
2. Tap it out over a garbage bin. If necessary, clean it with
a soft brush.
Attention: Do not clean the HEPA exhaust air
fi
lter
with water!
3. Brush or wipe the
fi
lter compartment if required.
4. Place the exhaust hatch with
fi
lter in the device and close
the hatch. The hatch must audibly lock into place.
Cleaning the housing and nozzles
• If needed, clean the housing with a damp, soft cloth.
• Regularly remove hair and lint from the nozzles.
Storage
• For storage you hook the
fl
oor nozzle into the holder on
the back of the device (see
fi
gure) and close down the
telescopic tube as far as it will go.
• Store the vacuum cleaner in a cool dry indoor room where
it cannot be reached by children or animals.
Technical Data
Article numbers:
04765 (pink / silver)
08302
(gold)
08318
(red)
08343 (grey / silver)
09096 (zebra design)
09897 (blue / silver)
Model number:
C-320-70 / C-320-80
Voltage supply:
220 – 240 V ~ 50 / 60 Hz
Power: 700
W
Protection class:
II
ID Instruction manual: Z
04765_08302_08318_08343_09096_09897
M DS V6 1118
D
