Cleanco Compact 45, Руководство пользователя

Страница: 15 / 84

14
1. Tachometer
The Blower Speed shows the rpm of the
Blower.
2. Hour Meter
The hour meter records the number of
hours the unit has run. This serves as a
time recorder for servicing the machine
and van.
3. Solution Pressure Gauge
This gauge registers the amount of
pressure in the system.
4. Solution Temperature Gauge
This gauge measures the temperature of
the cleaning solution as it exits the
machine.
5. Vacuum Gauge
This gauge indicates in inches of mercury
how much the vacuum system is
producing at any given time.
6. Solution Temperature Control
This valve allows the operator to control
the solution temperature by adjusting the
valve from cold to hot.
7. Pressure Control Regulator
The pressure regulator sets the pressure
of the solution system. This spring loaded
valve can be adjusted up or down setting
the pressure of the unit by turning the
knob clockwise. The pressure is
increased or reduced by turning the valve
counter clockwise. This valve must be
maintained in accordance with this manual
maintenance table.
8. Main Power Switch
The switch serves to energize the
magnetic clutch to turn the P.T.O.
9.
Pump Clutch Switch
This switch serves to energize the
magnetic clutch to turn the water pump on
or off.
10. Interior Light Switch
This switch controls the spot lights located
in the cargo area.
11. Auto Drain Switch
This switch controls the (Optional)
auxiliary pump to drain the waste
collection tank automatically. A float
switch located inside the tank
automatically turns on and off when the
solution level reaches a certain level.
12. High Pressure Outlets
The high pressure solution outlets are the
connecting point s for the high pressure
hoses. These outlets have quick connects
that allow hoses to be plugged into the
unit.
13. C.A.D. Port
This port is used when the (Optional) Auto
Drain is installed on the unit. It will accept
standard garden hoses. Waste tank
solution should only be dumped according
to Local, State, Provincial, and Federal
Laws.
14. Direct Feed
This port is used when the (Optional)
Water Box is being used instead of an “on
board tank”.
15. Flow Meter
The flow meter is a gauge to indicate how
much liquid detergent is being introduced
to the water system. Turning the knob on
the flow meter clockwise can increase the
quantity.
16. Blower Lube Port
The oil cup allows lubricant spray to reach
the lobes of the vacuum pump
. USE
LPS/TKX LUBRICANT
17. Oil View lines
The oil view lines indicate levels of oil in
both the vacuum pump and water pump.
They are “indicators only”. Vehicle must
be on a level surface.
18. Detergent Bottle
The detergent bottle holds the
concentrated detergent used in the
operation of cleaning.