![Cleanburn Norreskoven Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/cleanburn/norreskoven/norreskoven_installation-and-operating-instructions-manual_2620155005.webp)
Removing Internal Parts
This set of instructions explains the removal sequence that you will need to employ when servicing
your Cleanburn stove.
1.
Open the stove door(s) and remove the ash pan.
2.
Remove the baffle by pulling it forwards and sliding it to the left until the right side of it clears
the baffle support and then lowering it into the firebox and removing it (a).
3.
Remove the grate bars by lifting them out in pairs (b).
(a)
(b)
4.
Remove the side bricks by lifting them up and swinging the bottom end towards the centre of
the stove (c).
5.
Remove the rear brick (d).
(c)
(d)
1.
Remove the cam bar by lifting the left-hand end of it upwards until it clears the side casting,
pulling the left-hand end towards the front of the stove until it is outside the stove (d) and then
sliding it all the way out (e), taking care not to lose the cam hole plate.
(d)
(e)
(f)
Cam hole
plate