SET – PROGRAM ……….
EDIT SCENE
To create/overwrite/modify a SCENE customised by the user:
1 to 10 scenes can be customised using each single GlowUP channel.
•
Press ENTER to display Scene 1.
•
Use the UP and DOWN keys to select from the ten available SCENES.
•
Press ENTER to open the SCENE.
•
A bit value can be associated with each GlowUp channel inside each SCENE using the UP and DOWN
keys.
•
When finished with settings, press SELECT. A confirmation message appears: SAVE SCENE X ?.
•
Press ENTER to confirm and save the SCENE or SELECT to return to the previous menu.
SET – PROGRAM ……….
EDIT SEQUENCE
It allows you to create a sequence made up of a series of SCENES saved by the user.
•
Press ENTER to display MEMORY 1.
•
Use the UP and DOWN keys to select from the ten available MEMORY.
•
Press ENTER to open the MEMORY and add/delete/edit STEP with SCENE / SPEED / FADE as desired.
•
Press ENTER to confirm the selection or SELECT to return to the previous Menu.
SET – PROGRAM ……….
DMX RECORDER
To record a scene sequence programmed on the unit. To accept a recording, the projector must be set to:
Slave --> Receiver.
Press ENTER, reset the "Memory" by pressing ENTER again. GlowUp is now ready to store control unit DMX
data (DMX waiting ...).
On completing the recording, press ENTER to save, otherwise press SELECT.
SET ……….
DMX ADDRESS
It allows the user to set the DMX address to be assigned to the projector.
GLOW UP
21
Continued
➔
Press Select twice with GlowUP in idle conditions to open the SET
menu
Continued
➔
SET MENU
