5. Menus | 15
5. Menus
Global system and MIDI settings, sound settings for the Piano section
and various options for sustain and Control/Volume pedals are ac-
cessed through the
SYSTEM
,
MIDI
,
SOUND
and
PEDAL
menus. Menus
are browsed with the
PROG/MENU
dial, and values are changed using
the same dial while pressing
VALUE
.
Any changes made will automatically be stored until changed again except for the
Local Control Mode
setting of the MIDI menu. This setting will
revert to
On
every time the nord Piano 3 is powered on.
sYsTeM
1 - MEMORY PROTECTION
is set to
On
when the instrument is shipped in
order to prevent accidental overwriting of original Programs or uninten-
tional use of the Organize functions.
set this to
Off
to enable storage of Programs and the Organize function-
ality. Default value is
On
.
2 - GLOBAL TRANSPOSE
allows for transposing the instrument within a
range of
±6
semitones. Default value is
0
.
3 - FINE TUNE
can be used to fine tune the instrument within of a range
of
±50 cent
. Default value is
0 cent, 440Hz
.
4 - OUTPUT ROUTING MODE
can be set to
Stereo,
meaning both Piano
and sample synth will be routed to both outputs, or to
Piano : L, Synth
: R,
which will route Piano to the Left and sample synth to the Right
output, both being in mono. Default value is
Stereo
.
E
When using the Piano : L, Synth : R setting, applying the EQ to
both Piano and Synth causes all sound to be routed to the Left
output. This is due to the summation of all sound into one signal.
MIDI
1 - LOCAL CONTROL MODE
will be reset to
On
everytime the nord Piano
3 is powered up, but can manually be turned
Off
.
When set to
On
the keyboard and panel controls are used to play back
sounds and alter parameters directly. When set to
Off
, keyboard and
controller data are only sent via MIDI. Default value is
On
.
See page 14 for details on when this setting should be changed
to Off.
2 - CHANNEL GLOBAL
sets the MIDI channel which the nord Piano 3 trans-
mits on and responds to. Possible values are
1–16
, or
Off
. Default is 1.
3 - CONTROL CHANGE MODE
determines how the nord Piano 3 handles
MIDI CC (Control Change) messages. Can be set to
Off, Send, Receive
or
Send/Receive
. Default value is
Send/Receive
.
4 - PROGRAM CHANGE MODE
affects how the nord Piano 3 handles
Program Change MIDI messages. Possible settings are
Off, Send, Re-
ceive
or
Send/Receive
. Default value is
Send/Receive
.
5 - TRANSPOSE MIDI AT
can be set to
MIDI IN
or
MIDI OUT
.
With the
MIDI IN
setting, the transpose value (global and/or per Pro-
gram) will not be applied to the outgoing MIDI stream, but only to in-
coming MIDI data.
If set to
MIDI OUT
, any active transpose value will affect the MIDI notes
sent but not the incoming ones. Default value is
MIDI IN
.
sOunD
1 - PIANO PEDAL NOISE LEVEL
determines the sound level of the Pedal
noise. The range is
±6 dB
. Default value is
0dB
.
2 - PIANO STRING RES LEVEL
determines the sound level of the sympa-
thetic string Resonance effect for the Piano section. The range for this
parameter is
±6dB
. Default value is
0dB
.
PeDAL
1 - SUSTAIN PEDAL TYPE
can be set to
Auto
,
Closed
,
Open
or
Triple
depending on the polarity and type of the connected pedal. The
Triple
setting is intended for use with the nord Triple Pedal. In
Auto
mode the
type will automatically be determined if the pedal is connected to the
instrument prior to powering it up. Default value is
Auto
.
2 - MIDDLE PEDAL MODE
can be set to
Sostenuto
,
Synth Sustain
or
Synth Latch
.
The
Synth Sustain
setting lets the middle pedal operate as a dedicated
sustain pedal for the sample synth section.
Synth Latch
allows
the middle pedal to sustain a note or chord on the sample synth while
ignoring any new keyboard input, the Piano operating as usual. Default
value is
Sostenuto
.
3 - VOLUME PEDAL TYPE
can be set to
Roland EV7, Yamaha FC7, Korg
EXP2, Korg XVP10, Boss FV500L
or
Fatar SL.
Default is
Roland EV7.
4 - VOLUME PEDAL GAIN
ranges from
1-10
and enables boosting the
signal of the connected pedal in the event it does not provide full range.
The Default value is
1
.
When this menu option is selected and a Volume/Control Pedal
is connected the current value of the pedal will be indicated as a
percentage (0-100%) in the display. Refer to this value for checking
the available range of operation.
Vers.nr
v2.3
Korr. nr
1
Datum, rev.
2016-04-10
Datum, urspr.
2015-09-07
Konstruktör
José Esparza
Layout / ändrad av
Tina Jeppsson
Godkänd av
Benämning
SVEP
NORD PIANO 3 HA88
Clavia part #
40616
Mått plåt (mm)
1245,50 x 168,71
Skala
1:1
NCS-S-6000-N
540 001 (NCSS 9000-N)
542 002 (NCSS White)
-
1
2
3
4
■
Grå
■
Svart
■
Vit
-
Färgnummer (NCS-nr)
Lagerordning
Färg
LAGER 1: NCS-S-6000-N Grå
LAGER 2: 540 001 Svart (NCS-S-9000-N)
LAGER 3: 542 002 Vit (NCSS White)
