Claudgen ScreenZone CA1309S10, Инструкция по установке и эксплуатации

Страница: 22 / 23

,VV
7RXFKVFUHHQ&RQWUROOHU2SHUDWLRQ - FRQW
10.13 Heater status
The Status screen provides an overview of values
from all connected heaters. The heaters need to
be run before some of the values can be calcu-
lated.
In the event of a fault a red warning triangle is
displayed:
More details are available when tapping the
details button. The detailed status screens are
primarily for installers or engineers to help with
installation or fault diagnostics.
The connected heaters screen shows all of the
currently connected heaters, in order of address
ID. Heaters are connected when the controller
is first powered up. In order to connect to newly
powered heaters, press Refresh to search for
heaters.
For each connected heater, up to 3 detailed
status screens are available. These are general
status, faults and sensor screens.
The links to the faults and sensor screens are hid-
den when no faults have been identified.
10.13 Heater status - cont.
The general status screen shows details about
the heater and all of the internal blower units.
The heater needs to be run before some of the
values can be calculated.
The faults screen can provide detailed diagnos-
tics of faults for each internal blower unit.
The sensor screen shows the status of the tem-
perature sensors.
10.14 Energy usage
The energy usage screen provides information
related to energy used from the day the heater
was installed. The values are calculated based
3PH 400V and so will differ from actual energy
usage when mains voltage is lower or higher.
10.15 Identification
User can set ID number for controller identifica-
tion. This number is shown on the left hand cor-
ner of the home screen. This feature is useful in
situation where there are more than one control-
ler side by side.