Claudgen CH06CPiRX, Инструкция по установке и эксплуатации

Страница: 4 / 18

4
51000486 Iss 01
2.1 Introduction
This instruction manual describes the com-
mercial fan heater range from Consort.
These heaters are robustly designed for use
as space heating in large areas. With a
maximum heat throw of up to 11m depend-
ing on the room temperature and selected
fan speed, they are ideal for areas such as
garages, workshops and warehouses.
Each heater is equipped with an intelligent
fan control, which allows the heater to
adapt to the environment by automatically
adjusting the fan speed. The heater pro-
vides instant directional warmth, and also
has a fan-only setting for air circulation.
The heaters are wall mounted with multi-
directional brackets.
Heaters are available in 6kW, 9kW and 12kW
rating. There are two versions of the 6kW
heaters available, single and 3 phase. The
heaters can be controlled by either CRXSL
wireless controller or CHMC colour touch
screen master controller. For larger areas, up
to 8 air curtains can be easily interconnect-
ed using CAT5/CAT6 RJ45 networking cable
when used together with CHMC controller.
The heaters can be also controlled by BMS
using MODBUS control system.
It is recommended that this control cable is
run separately within its own trunking to
avoid external interference.
Up to two environmental sensors CHES can
be connected to the heaters when used
together with CHMC controller.
Environmental sensors offer 3 functions; re-
mote temperature measuring, microwave
occupancy sensor and remote or boost
switch connection. All functions are fully pro-
grammable and can be associated with
any heaters in the system.
The controllers aren’t supplied with the heat-
ers and have to be purchased separately.
WARNING:
THIS HEATER SHOULD NOT BE IN-
STALLED WHERE THERE IS A
CORROSIVE ATMOSPHERE OR
EXCESSIVE DUST .
2. Introduction
2.2 CRXSL wireless controller
The CRXSL wireless controller (not supplied with
the heater) can control any number of CH
heaters within its range. It has a large easy-to-
read backlit LCD display and offers up to six
temperature settings a day, seven days a
week. The CRXSL can also provide three levels
of heat and 3 fan speeds in manual control
mode. Follow CRXSL user guide for more de-
tails.
2.3 CHMC Controller
The CHMC colour touch screen controller (not
supplied with the heater) giving options for 8
fan and 8 heat settings together with accurate
temperature control, can be mounted up to
50m from the heaters.
The electronic touch screen controller (shown
on the picture above) allows the user to con-
trol either a single heater, or a network of up to
8 heaters with individual settings. It is compati-
ble with Consort Connect app allowing for re-
mote control and monitoring of the heating.
The controller is designed to be mounted on a
surface double gang back box, and is pow-
ered by an RJ45 connection.
The controller will
not fit metal or dry lining back box.
The total cable length of the system can be up
to 50 metres.
Up to two environmental sensors CHES can be
connected to the heaters.