Specifications
Troubleshooting
LCD Display
Multi-functional LCD
Keyboard
88 Hammer-Action Keys
Polyphony
128
Voice
600
Song
120 preset songs, 10 user songs
Style
230 preset styles, 10 user styles
Demo
5
Control button
Power Switch, Volume knob, Brilliance knob, Styles, Tempo+/-,
Acc Vol, Mixer, F/-, Start/Stop, Sync Start, Intro/
Ending, Fill A, Fill B, Fill C Fill D, Chord Mode, Voices, Dual,
Lower, USB Device, Metro, Twinova, Octave, Song, Bank,
Store, M1-M4, O.T.S., Shift, Demo, +/Yes, -/No, Data dial,
Melody off L/R
Record Function
Record, Accomp, Melody 1-5
Memory
96
Connectors
PHONES (2 standard. ¼” phone),AUX IN, AUX OUT
USB-MIDI, MIDI IN/OUT, USB Device Jack
Pedals (Sustain, Soft, Sostenuto)
Power Supply
AC 220~240V, 50Hz
Speaker
HIGH 8
Ω
10W X2
LOW 6
Ω
40W X2
Dimensions
1368(L)x525(W)x890(H)mm
Weight
56KG
* All specifications and appearances are subject to change
without notice.
31
Problem
The speakers produce a pop sound
whenever the power is turned ON or OFF.
No sound when the keyboard is played.
When using a mobile phone, noise is
produced.
The auto accompaniment does not play
back even Sync is in standby condition
and a key is pressed.
Certain notes sound at wrong pitch.
The Harmony function does not operate.
After connecting with the computer,
the piano is not recognized.
Possible Cause and Solution
This is normal and is no cause for alarm.
Make sure the master volume is set to an appropriate level. Check if headphones
are plugged into Jack 2. The R1/R2/L voice volume (Mixer) settings could be set
too low. Make sure the voice volumes are set at appropriate levels.
Using a mobile phone in close proximity to the instrument may produce
interference. To prevent this, turn off the mobile phone or use it further away from
the instrument.
You may be trying to start accompaniment by playing a key in the right-hand range
of the keyboard. To start the accompaniment with Sync Start, make sure to play a
key in the left-hand range of the keyboard.
Make sure that the tuning value is set to 0. Press and hold the [+/YES] and [-/NO]
buttons at the same time, then turning the power on will set INSTRUMENT to
default.
Please make sure the Harmony function is on. And Harmony cannot be turned on
when a drum kit is selected for the voice R1.
Please check if the USB cable is being connected firmly, or try connecting another
USB port of the computer,without the need to install another driver on the PC.
C
M
Y
CM
MY
CY
CMY
K
Aw_DP370_Manual_G06_150430.ai 31 2015/4/30 12:57:09
Aw_DP370_Manual_G06_150430.ai 31 2015/4/30 12:57:09
