26
The piano has 130 songs in all, including 10 user songs.
Listening to the songs
1. Press the [SONG] button to enter the song mode and it will play all
songs circularly.
2. Use the data dial, [+/YES] or [-/NO] button to select a song.
3. Once you start playing a song by pressing [START/STOP] button, it
will play current song repeatedly.
4. When playback stops, press [STYLE] or [VOICE] button to exit song
mode.
Song Control
1. Introductory beat
Before song starts playing, it has the introductory beat, the measure
starts from negative value. It begins to play song when the measure
goes to 1.
2. REW, FF and PAUSE
When the song is playing:
Press the [FF] button to fast forward the song.
Press the [REW] button to rewind the song (base on the measure).
Press the [PAUSE] button to pause the playing song.
3. Song Repeat
During song playback, press [REPEAT A/B] button to set the
beginning for a loop section of the current song, then press it again
to set the loop end. During loop playback, press [REPEAT A/B]
button to quit the loop and go back to song playback.
Practice the song
In song mode, press [MELODY OFF L/R] button to turn on/off the left
or right hand part, so as to practise each part separately.
A lit “L” on LCD indicates only the left hand melody will play and the
right hand part will be muted, so you can practise the right hand
melody.
In the same way, a lit “R” on LCD means you can practise the left hand
part along with the right hand melody.
Pressing and holding [+/YES] and [-/NO] button together and then turn
the power on, the piano would be restored to factory setting. It will
delete all the user data: user styles, user songs, registered memory.
The process will last about 8 seconds, after which the piano will start
up normally.
Song
Restore Factory Setting
CHORD MODE
CHORD MODE
MELODY OFF
MELODY OFF
L / R
L / R
C
M
Y
CM
MY
CY
CMY
K
Aw_DP370_Manual_G06_150430.ai 26 2015/4/30 12:57:07
Aw_DP370_Manual_G06_150430.ai 26 2015/4/30 12:57:07
