27
947226
OPERATION
Originate a Handsfree Page
•
Lift handset, receive dial tone (default)
•
Dial access code
•
Hear alert tone (default) in handset and at
speaker
•
Issue page
•
Anyone hearing page can reply handsfree by
speaker
•
Hang up to terminate call
Originate a Group Page
•
Lift handset, receive dial tone (default)
•
Dial group page access code
•
Hear alert tone (default) in handset and at
speaker
•
Issue page
•
Hang up to terminate page
Originate a “Serial” Group Page
•
Lift handset, receive dial tone (default)
•
Press #60 and codes for groups to receive page
(attendant receives a single beep tone after each
group code; if an invalid group is dialed
attendant receives an error tone and is allowed to
re-enter the group)
•
Press “*” to connect the page after last group is
dialed
•
Hear alert tone (default) in handset
•
Issue page
•
Hang up to terminate page
Originate an All Call Page
•
Lift handset, receive dial tone (default)
•
Dial the all call page code (#11 system all call;
#12 for external all call-multiple VC-24s)
•
Hear alert tone (default) in handset
•
Issue page (if multiple VC-24s are wired together
and the external all call page is dialed, the page
will be heard through all interconnected VC-24s)
One-Way Page with Meet Me/Follow Me
Attendant makes an all call or group page to locate a
specific individual -
•
Called person presses call button two times at
any talkback speaker (this cancels the page to all
other speakers and connects the attendant to the
answering speaker)
•
Called person presses the call button of another
speaker included in the original page two times,
the call is disconnected from the active speaker
and reconnected at the new speaker.
•
Handsfree alert tone notifies the attendant and
speaker location the Meet Me or Follow Me was
successful.
Inhibit
Allows the use of a single line phone (“A” lead
modified). When the phone goes offhook, all
handsfree, group, and/or all call pages are cancelled
and the phone is connected to the attendant.
Override Page Port
When a phone connected to the override page port
goes offhook, it is immediately connected to all
speakers for a one-way page. Any existing handsfree
or one-way pages will be placed at the top of the
queue for reconnection when the priority phone
releases. The attendant phone receives a repeat beep
tone alerting of an override.
Queue Operation
Attendant phone is in use and another call is placed
from a speaker location, the phone and connected
speakers receive a queued call tone (single or triple
beep tone), and the call is placed in the queue.
Pressing the “#” key twice while on a call with one or
more queued calls, will disconnect the current call
and connect the attendant to the next call in the
queue. If the attendant hangs up while calls are in the
queue, the phone will ring and the next call in the
queue will be connected when the phone is answered.
Queued calls will be accessed in the order received
with a maximum of 20 calls being in the queue at one
time. If the queue is full, additional calls are ignored
unless the last queued call has a lower priority than
the incoming call in which case the lower priority call
will be replaced in the last position by the new call.
Placing a Call from a Speaker
•
Press call button, attendant phone rings
•
Attendant answers, phone and speaker are
connected through handsfree circuit
•
Hear alert tone in handset and at speaker
•
Person at speaker converses handsfree to
attendant
•
Attendant must hang up to terminate call
Placing a Call from a Door Box
•
Press door button, attendant phone rings
•
Attendant answers, phone and speaker are
connected through handsfree circuit
•
Hear alert tone in handset and at speaker
•
Person at speaker converses handsfree to
attendant
•
Attendant unlocks door by pressing “*” key
twice while connected to door speaker
(door
speaker must be connected to one of the last four
zones of the main board making the door unlock
feature available.)
•
Attendant must hang up to terminate call.
