E
N
G
LI
S
H
Mounting & Installation
1. Mounting of antenna
Attach the supplied antenna to the bracket on the top of the camera. The
antenna can be angled for the best possible reception. The best reception is
obtained with the antenna angled vertically.
2. Camera assembly
Mount the camera in the supplied table stand or mount it on the ceiling or wall
next to the bracket hole on the back of the camera.
3. Connection of network cable
Connect a standard network cable to the
LAN
connection to connect the
camera to your network switch or router.
When a network cable is connected the wireless network (WLAN) is
automatically disconnected.
• For configuration it is recommended that the camera is connected through the
network cable.
4. Starting the camer
a
Connect the supplied power adaptor to the input marked
POWER
. The camera
starts automatically up. Use only the included or recommended adaptor.
. Indicator lights
POWER
When started the light is lit a short while before it changes to a
blinking light for 15-20 seconds. Thereafter the light shines
steadily.
ACTIVE
The LEDs blink only when the camera image is transferred in
real time to one or several users.
NETWORK
Lights when the camera is connected to the network.
Содержание NC802APT
Страница 51: ...51...