Clas Ohlson NC802APT, Инструкция по эксплуатации

Страница: 11 / 52

11
E
N
G
LI
S
H
Using the video program Monitor Manager
1. When the program has begun Monitor Manager is displayed on the screen.
2. Click the Setup button
on the right side of the
screen. The dialogue
box Setup appears.
If you have several
cameras connected to
the network you can
also configure them
here.
3. Select
Camera Setup
option and
mark the camera in the list Camera
List . Enter a number for the camera
in the Local ID field. If needed you
can also change the camera setting
in the field
Camera Data
to the
right.
4. Click Add when you have done your settings. The camera is added to the list
of connected cameras.
5. Click Exit . The program returns to the screen image Monitor Manager.
6. Click on the camera’s number in the control panel to the right. The camera
image appears.
7. If you have several cameras connected these are shown in the boxes above.
Click one of the four boxes Video Layout in the control panel to the right to
select how many camera layouts are to be displayed on the screen.
8. Control the camera by clicking on the control arrows in the program’s lower
right corner.