13
E
N
G
LI
S
H
Care and Maintenance
Use a soft damp cloth to wipe the product. Never use strong solvents or
detergents.
Trouble Shooting Schedule
Not able to connect to the camera / The program does not have contact with the
camera
• Check that any firewalls in your computer are not blocking the camera
connection to the network. Take the firewall away or configure the firewall.
• Make sure that the IP address you gave the camera corresponds with the
network series of IP addresses. Connect the camera and run the configuration
program again.
• Check that the network cable you are using is whole and also of the same type
as the one supplied with the camera.
• Disconnect the camera’s power supply a short while and try again later.
• Try to restore the camera by pressing the reset button in located on the botton
of the camera.
Disposal
Follow local ordinances when disposing of this product. If you are unsure about
how to dispose of this product contact your municipality.
Specifications
Power Supply
5 V DC, 2.5 A via included adaptor
Network
LAN/WLAN with support for TCP/IP, SMTP, SHCP, HTTP,
DDNS
WLAN
802.11 g (WPA-PSK, WEP (64/128 bits security)
Max resolution
640x480 (VGA)
Содержание NC802APT
Страница 51: ...51...