5
E
n
g
li
s
h
14
15
16
17
18
19
20
21
22
23
24
25
Remote controller
14. [ ] Mute button
15. [
▲
] Up in the play list/menu
16. [
|◄◄
] Backwards in the play list/menu
17. [
▼
] Down in the play list/menu
18. [ MENU ] Backwards in the iPod/
iPhone menu
19. [ BASS ] Raise/lower bass level
20. [ ] Standby switch
21. [
►
II ] Play/Pause
22. [
►►
| ] Forwards in the play list/menu
23. [ ENTER ] Confirm selection
24. [ + ] Volume/Bass
25. [ - ] Volume/Bass
Operation
Note:
Be careful not to damage your iPod/iPhone or the dock during the docking process.
• Plug the mains adaptor into a wall socket and then into the socket on the back of
the unit. Make sure the ON/OFF switch (11) is in the ON position. A blue LED on
the front of the unit will start to flash to indicate that the unit is in standby mode.
• Place an iPod/iPhone into the dock and adjust the back support (4) until the iPod/
iPhone is firmly seated.
• As long as the speaker is in standby or play mode, the iPod/iPhone will be charged.
• Press [ ] to start playback. The LED will now shine steadily.
• Start/stop playback and navigate in the play lists and in the iPod/iPhone menus
using the controls listed above.
• The Repeat and Random functions cannot be controlled via the unit or the remote
controller; they can only be controlled using the buttons on your iPod/iPhone.
Bass
• The remote controller has a bass control.
• Press [ BASS ] and then [ + ]/[ - ] to raise or lower the level of the bass.
Note:
After 5 seconds, the [ + ]/[ - ] buttons revert to controlling the volume.
